Nicholas Houghton: Engineering Crew Safety for NASA’s Artemis Missions

Nicholas Houghton: Engineering Crew Safety for NASA’s Artemis Missions

2 Min Read

Nicholas Houghton: Engineering Crew Safety for NASA’s Artemis Missions

Nicholas Houghton, right, supports crew suit-up operations during Underway Recovery Training 12, an end-to-end practice recovery run conducted at sea to prepare for Artemis II.

Nicholas Houghton always dreamed of working at NASA and one day becoming an astronaut. Today, he helps design systems that keep crews safe during missions aboard NASA’s Orion spacecraft, including the successful Artemis II mission around the Moon.

A man poses and smiles wearing an orange spacesuit.
Nicholas Houghton in NASA’s Orion Crew Survival System Spacesuit.

I hope someday people look back at Artemis and marvel at the technological achievement and collective dedication that it took to carry out these missions, just like we do now for Apollo.

Nicholas Houghton

Nicholas Houghton

Orion Crew Survival Systems Engineer

After joining NASA as a Pathways intern, Houghton later became a full-time engineer on the Orion Crew Survival Systems (OCSS) team at NASA’s Johnson Space Center in Houston. The OCSS team designs and certifies the orange pressure suits that were worn by astronauts inside Orion during Artemis II, along with the survival hardware integrated into each suit system.  

Houghton manages key pieces of flight hardware that keep crew members safe during contingency scenarios before launch, in flight, and after landing, including the Orion Crew Survival Kits, Suit-Worn Survival Suite, and Life Preserver Units. He guides each system from design through testing and final certification to ensure it performs as required in flight. 

Four people pose in a laboratory setting. They are all wearing
Nicholas Houghton, left, and two other suited subjects participate in Human Vacuum Chamber Testing at NASA’s Johnson Space Center to help certify Orion’s environmental control and life support system (ECLSS) for Artemis II. The test lasts about 12 hours while fully suited.

Like many complex engineering efforts at NASA, the work relies on close collaboration across disciplines. Houghton works alongside experts in electromagnetic interference, radiation, stress and loads, and materials to evaluate and refine each system. He also helps lead development of water survival and post-landing hardware, writing manufacturing and assembly procedures and troubleshooting issues during integration and testing. 

Nicholas Houghton gives U.S. Navy medical personnel space suit training aboard amphibious transport dock USS Somerset (LPD 25) during NASA Underway Recovery Test 12 in the Pacific Ocean, March 26, 2025.

Beyond hardware development, Houghton prepares astronauts and recovery teams for real-world operations. He supports suit-up activities, helps train Department of Defense recovery forces, and participates in Underway Recovery Training alongside the U.S. Navy to rehearse post-splashdown operations.  

Ground testing plays a critical role in that preparation. During these tests, systems are pushed to their limits to uncover potential issues before flight. 

I have had my hardware fail during ground testing. It takes teamwork, quick thinking, technical understanding, and a willingness to dig into every detail to solve these kinds of problems.

Nicholas Houghton

Nicholas Houghton

Orion Crew Survival Systems Engineer

Nicholas Houghton, right, supports crew suit-up operations during Underway Recovery Training 12, an end-to-end practice recovery run conducted at sea to prepare for Artemis II.

Outside of his NASA career, Houghton gives back by volunteering as a firefighter and emergency medical technician. “Serving my community is something that I have always been passionate about,” he said. “I am thankful to have the opportunity to support those around me.” 

About the Author

Sumer Loggins

Sumer Loggins

Share

Details

Last Updated

May 11, 2026

Powered by WPeMatico

Get The Details…
Sumer Loggins

NASA Invites Media to Annual Lunabotics Robotics Competition 

NASA Invites Media to Annual Lunabotics Robotics Competition 

Image shows three people in white protective suits inside a room with another person wearing a blue shirt and blue jeans at NASA's Kennedy Space Center in Florida in 2022. Around them is a red cart with a silver structure and green looking wheels. Photo credit: NASA/Kim Shiflett
Students from the United States Military Academy (West Point), dressed in safety gear, prepare to enter the mining arena with their robotic miner during NASA’s LUNABOTICS competition on May 24, 2022, at the Center for Space Education near the Kennedy Space Center Visitor Complex in Florida. More than 35 teams from around the U.S. have designed and built remote-controlled robots for the mining competition.
NASA/Kim Shiflett

NASA will hold its 2026 Lunabotics Challenge Tuesday, May 19, to Thursday, May 21, at the Astronauts Memorial Foundation’s Center for Space Education at the Kennedy Space Center Visitor Complex in Florida.  

Links to view the Lunabotics competition live can be found on the agency’s Lunabotics page. The competition is slated to run between 8 a.m. and 6 p.m. each day.   

Media are invited to attend the competition event on Wednesday, May 20, and should RSVP by 4 p.m. EDT on Monday, May 18, to the Kennedy newsroom at: ksc-newsroom@mail.nasa.gov.  

For this challenge, 50 college teams from across the country will convene to design, build, and operate their own lunar robot prototypes.  

The teams’ self-driving rovers must be capable of building a berm, a protective barrier, from soil and other material simulating lunar regolith to safeguard Artemis infrastructure on the Moon. In space, such berms could protect equipment from debris during lunar landings and launches, shade cryogenic propellant tank farms, help shield a nuclear power plant from space radiation, and serve other purposes. 

“The task of robotically building berm structures will be important for preparation and support of crewed lunar missions,” said Kurt Leucht, NASA software developer, In-Situ Resource Utilization researcher, and Lunabotics commentator located at Kennedy. “These competing teams are not only building critical engineering skills that will assist their future careers, but they are literally helping NASA prepare for our future Artemis missions to the Moon.” 

NASA’s Lunabotics Challenge was established in 2010. As one of the agency’s Artemis Student Challenges, the competition is designed to engage and retain students in STEM fields by expanding opportunities for student research and design in science, technology, engineering, and mathematics. 

For more competition information, visit: 

https://www.nasa.gov/learning-resources/lunabotics-challenge

–end– 

Amanda Griffin 
Kennedy Space Center, Fla. 
321-867-2468 
amanda.griffin@nasa.gov 

Powered by WPeMatico

Get The Details…
Elyna Niles-Carnes

Joint Earth Observation Mission Quality Assessment Framework – Optical Guidelines Documents Released

Joint Earth Observation Mission Quality Assessment Framework – Optical Guidelines Documents Released

3 min read

Joint Earth Observation Mission Quality Assessment Framework – Optical Guidelines Documents Released

Along with the title, the cover of the Joint Earth Observation Mission Quality Assessment Framework – Optical Guidelines document features a satellite in space above Earth, along with the ESA, NASA, and USGS logos
Released on April 26, 2026, the Optical Guidelines document provides specific guidelines for the mission quality assessment of optical sensors as part of the implementation of the generic Earth observation mission quality assessment for the optical domain.

NASA’s Commercial Satellite Data Acquisition (CSDA) program, in conjunction with the European Space Agency (ESA) and the U.S. Geological Survey (USGS), has released the Joint Earth Observation Mission Quality Assessment Framework – Optical Guidelines.

Released on April 26, 2026, the Optical Guidelines document provides specific guidelines for the mission quality assessment of optical sensors as part of the implementation of the generic Earth Observation (EO) mission quality assessment for the optical domain. This document summarizes the goals of the Joint Earth Observation Mission Quality Assessment Framework, reviews how optical mission quality is demonstrated through documentation, outlines guidelines for verifying that a mission’s data quality aligns with stated sensor performance, and provides appendices containing information on common radiometric and geometric calibration and validation practices.

“The release of these joint guidelines for EO data from optical missions both documents the rigorous standards we have for commercial data and bolsters the confidence of the user community in the CSDA’s commercial data acquisitions,” said CSDA Project Manager Dana Ostrenga. “By releasing this document to the public, we’re giving end-users the opportunity to review the approach for verifying whether the quality of commercial EO data is consistent with the stated performance of the mission.”

The Joint Earth Observation Mission Quality Assessment Framework was produced as part of an ESA and NASA partnership supporting Earthnet Data Assessment Project (EDAP) and CSDA activities, the document details the methodology used to assess the quality of data from commercial satellite data providers. This framework provides standardized, transparent, and repeatable data quality assessment processes and outputs to support mission selection, data integration, and the trusted use of commercial EO data for science and applications. Furthermore, the agencies intend to update the guidelines in step with the evolution of the market and the advancement of Earth sciences and applications of EO data products.

About the Joint EO Mission Quality Assessment Framework

The expanding range of applications for EO data products and the availability of low-cost launch services have resulted in a growing number of commercial EO satellite systems. This growth in the marketplace has prompted space agencies like NASA, ESA, and others to explore the acquisition of commercial EO data products and their potential to complement the capabilities and services currently available for scientific and operational purposes.

To ensure that decisions regarding the acquisition of commercial data can be made with confidence, ESA, NASA, and other stakeholders agreed there was a need for an objective framework to assess the quality of data from commercial sources. To that end, ESA established the EDAP, which performs early assessments of EO mission data to evaluate their quality and the potential integration of these missions as third-party missions within ESA’s Earthnet program. The development of EDAP led to the Joint Earth Observation Mission Quality Assessment Framework, which was later customized for the different types of sensors used in atmospheric, synthetic aperture radar, thermal infrared, and now, optical EO missions.

This joint framework serves as the foundation for the CSDA program’s comprehensive evaluation process to ensure the quality of commercial EO data. The process focuses on assessing geometric and radiometric quality, validating data against trusted reference datasets, ensuring completeness and traceability of dataset documentation, and evaluating data accessibility and utility. Together, these rigorous evaluation efforts help build trust in commercial partnerships, ensure scientific integrity and interoperability, and foster innovation within the EO community.

Share

Details

Last Updated
May 11, 2026

Related Terms

Powered by WPeMatico

Get The Details…

Hubble Survey Sets Up Roman’s Future Look Near Milky Way’s Center

Hubble Survey Sets Up Roman’s Future Look Near Milky Way’s Center

7 min read

Hubble Survey Sets Up Roman’s Future Look Near Milky Way’s Center

An observation (labeled u201cVISTA V V V Survey, Near-infrared) of the Milky Wayu2019s center pointing toward its supermassive black hole, which is labeled Sagittarius A* (pronounced u201cA staru201d). At 7 ou2019clock from center is a small region, outlined with 5 fields of view from the Nancy Grace Roman Space Telescope that are stacked together in a horizontal rectangle. This region is about a third of the image in length and a fifth of the image in width. Within that same region are diagonal lines that alternate between orange and blue. A legend at the bottom left shows two Hubble instruments. One of them, marked with an orange diamond, is labeled u201cW F C 3 / U V I S.u201d The other, marked with a blue diamond, is labeled u201cA C S / W F C.u201d The background is a field of stars, gas, and dust that appear grey, except the center third that runs from the left to the right of the frame, which is composed of brown filaments of dust and gas. The tiny region surrounding Sagittarius A star appears orange.
This VISTA VVV Survey image shows the galactic bulge near Sagittarius A*, the supermassive black hole at the Milky Way’s center. A region planned for observation by NASA’s Nancy Grace Roman Space Telescope is outlined. This area has been observed by NASA’s Hubble Space Telescope.
Image: NASA, Alyssa Pagan (STScI); Acknowledgment: VISTA, Dante Minniti (UNAB), Ignacio Toledo (ALMA), Martin Kornmesser (ESO)

The Milky Way’s galactic bulge, the bulbous region that surrounds the galactic center, contains a dense collection of stars, planets, and other free-floating objects. This region has been studied for decades with numerous ground-based and space-based telescopes, including NASA’s Hubble and James Webb space telescopes. Soon, NASA’s Nancy Grace Roman Space Telescope will be the first to make studying the galactic bulge a part of its core science objectives, building on the data collected from all observatories before it. Roman’s field of view will cover more area at a far faster cadence than previous space telescopes, allowing it to survey millions of stars and find thousands of new exoplanets.

To support Roman in characterizing numerous stars and planets, astronomers sought to use Hubble to observe many of the same areas of the galactic bulge that Roman will observe in its core Galactic Bulge Time-Domain Survey. By comparing Hubble data taken months or years earlier to new Roman data, astronomers will be better able to interpret Roman’s forthcoming observations. The Roman telescope team is targeting as soon as early September 2026 for launch.

“A top priority of our Hubble survey is to cover as much sky area as possible,” said Sean Terry, project lead and assistant research scientist from the University of Maryland, College Park and NASA’s Goddard Space Flight Center in Greenbelt.

A paper about the team’s work published May 11, 2026 in the Astrophysical Journal.

‘Small’ lenses, large discoveries

Many planetary systems within the Milky Way evolve much like our solar system did, beginning with the collapse of a cosmic gas cloud, the growth of a star, and the formation of surrounding planets. However, in some systems, different events can result in a planet being ejected from the system where it formed. Hundreds of these “rogue planets” will be detected by Roman’s Galactic Bulge Time-Domain Survey, in addition to previously unseen, isolated neutron stars, and even black holes with masses similar to our Sun.

This survey consists of six 72-day observing seasons during which Roman will take a snapshot every 12 minutes of a large portion of the bulge (approximately 1.7 square degrees of the region, or the area of 8.5 full moons). While it will detect a variety of targets, the survey is optimized to look for a specific type of event known as microlensing.

Microlensing events, a type of gravitational lensing event, occur when the light from a more distant object is warped by the mass of a closer object along the line of sight. These events occur on a much smaller scale than larger lensing events (on the order of individual stars instead of galaxies or galaxy clusters) and allow us to search for exoplanets between us and the densely packed stars within the galactic bulge.

“The great thing about microlensing is that we’ll be able to do a complete census of objects as small as Mars that are moving between us and these fields in the bulge, no matter what it is,” said co-author Jay Anderson of the Space Telescope Science Institute in Baltimore.

For Roman, from Hubble

When a telescope observes a lensing object, such as a bright star, aligning with a star in the galactic bulge, it can be difficult for astronomers to decipher which of the two the starlight comes from. Therefore, timing is a key consideration. If astronomers can identify light sources separately before a microlensing event occurs, it becomes far easier to disentangle them.

To collect this pre-Roman data, astronomers used the Hubble Space Telescope to conduct a large-scale survey, which began in the spring of 2025, covering much of the same area that Roman will observe in the Galactic Bulge Time-Domain Survey. The size of this program is even larger than two previous surveys (each around 0.5 square degrees) that led to Hubble’s largest mosaic, that of our neighboring Andromeda galaxy, which took over 10 years to assemble.

“The main goal of these observations is to be able to identify objects that participate in lensing events during the Roman survey, catching them before they undergo the lensing event,” said Anderson. “When, in a couple of years, an event happens during Roman’s long stare at the field, we can go back and say, ‘This was a red star, this was a blue star, and the event happened when the red star went in front of the blue star.’”

The data from Hubble also will help shape the analysis of the lensing objects themselves. The microlensing event itself measures only a ratio of the masses of a host star and its planet. With data from stars before or after their microlensing events, however, scientists would be able to measure the stars’ individual masses, echoing the way Hubble previously determined the mass of a star and its planet in the Milky Way. This method turns a more opaque measurement of the relationship between a star and its planet into one far more certain. 

“Instead of estimating a mass ratio of a planet that’s orbiting a star, we can say that we’re confident it’s a Saturn-mass planet orbiting a star that’s 0.8 solar masses, for example,” Terry said. “So with the help of precursor imaging from Hubble you can hope to get direct measurements of the masses as opposed to indirect mass ratios.”

Next leap in magnitude

While exoplanet discovery is a large part of Roman’s Galactic Bulge Time-Domain Survey, observing such a large area with Hubble also can help identify areas of extinction, dense pockets of dust and gas that absorb or scatter light, allowing us to create maps detailing where we can see stars and where we can’t.

Hubble’s survey also has provided the crucial beginning of a brand-new catalog of stars, which will help astronomers characterize the host stars of exoplanets discovered by Roman. The research team predicts Roman will add to Hubble’s star catalog by an order of magnitude.

“This Hubble survey will build a catalog of 20 to 30 million point sources,” said Terry. “But, by the end of the Galactic Bulge Time-Domain Survey, Roman may measure about 200 to 300 million, and it will produce, essentially, some of the deepest images ever taken of any part of the sky.”

The data from the most recent Hubble survey is available in the Mikulski Archive for Space Telescopes.

The Hubble Space Telescope has been operating for over three decades and continues to make ground-breaking discoveries that shape our fundamental understanding of the universe. Hubble is a project of international cooperation between NASA and ESA (European Space Agency). NASA Goddard manages the telescope and mission operations. Lockheed Martin Space, based in Denver, also supports mission operations at Goddard. The Space Telescope Science Institute in Baltimore, which is operated by the Association of Universities for Research in Astronomy, conducts Hubble science operations for NASA. 

The Nancy Grace Roman Space Telescope is managed at NASA Goddard with participation by NASA’s Jet Propulsion Laboratory in Southern California; Caltech/IPAC in Pasadena, California; the Space Telescope Science Institute; and a science team comprising scientists from various research institutions. The primary industrial partners are BAE Systems, Inc. in Boulder, Colorado; L3Harris Technologies in Melbourne, Florida; and Teledyne Scientific & Imaging in Thousand Oaks, California. 

Share

Details

Last Updated
May 11, 2026
Editor
Andrea Gianopoulos
Contact
Media

Claire Andreoli
NASA’s Goddard Space Flight Center
Greenbelt, Maryland
claire.andreoli@nasa.gov

Matthew Brown, Christine Pulliam
Space Telescope Science Institute
Baltimore, Maryland

Powered by WPeMatico

Get The Details…

NASA Astronaut Jessica Meir

NASA Astronaut Jessica Meir

NASA Astronaut Jessica Meir sits in a chair. Her body is slightly turned to the right as she looks forward. She is wearing the bottom half of a spacesuit; the top half and gloves are on the floor next to the chair.
NASA/Josh Valcarcel

NASA Astronaut Jessica Meir sits for a portrait at NASA’s Johnson Space Center in Houston on Sept. 23, 2025. This photo was chosen as one of the 2025 NASA Photographer of the Year finalists.

Meir launched on NASA’s SpaceX Crew-12 mission to the International Space Station in February 2026 with fellow NASA astronaut Jack Hathaway, ESA (European Space Agency) astronaut Sophie Adenot, and Roscosmos cosmonaut Andrey Fedyaev.

Meir was selected by NASA in 2013. Prior to becoming an astronaut, her career as a scientist focused on the physiology of animals in extreme environments.  Meir served as flight engineer on the International Space Station for Expedition 61 and 62 and participated in the first all-female spacewalks.

Image credit: NASA/Josh Valcarcel

Powered by WPeMatico

Get The Details…
HQ Web Team