Sols 4338-4340: Decisions, Decisions

Earth planning date: Friday, Oct. 18, 2024

On sol 4338, we have a science block planned as well as some arm activities. Our science activities include a ChemCam observation of “Donkey Lake.” This is a bedrock target with exposed laminations. In geology, lamination is a sequence of small-scale, embedded fine layers of sedimentary rock. Next, we will do an RMI mosaic as well as Mastcam imaging on “Fascination Turret” to document the boulder configuration for study of both debris flow and rock deposition processes. We’ll also do a Navcam dust devil survey to study the Martian atmosphere, before moving into our arm backbones. We’ll perform a DRT and APXS on several bedrock targets with exposed layering. An exciting sol for geology!

Sol 4339 presented some interesting decisions for our planning team to make. We started out with a science block. This included a ChemCam LIBS analysis on a soil target with interesting color differences. We also performed an RMI mosaic and Mastcam imaging of “Whitebark Pass” to study possible surface erosion. After this science block, we planned to do a long traverse, which is where planning got a bit tricky. 

The drive was a bit complicated to plan. The terrain had lots of rocks which ultimately prevented us from planning a guarded drive (i.e., a drive using auto navigation), which would have extended the drive length. There are occlusion considerations — we always want to end the drive in a good orientation for a communications link. When evaluating our end of drive, there are potential configurations where the line of sight for communications would be blocked, either due to terrain or due to objects on the rover deck. Here, because of the many and large size of rocks in our terrain, we were not confident that auto-navigation would not fault and position us in a bad orientation for our next communications window. With this risk, we decided to take a shorter drive with a sure unoccluded end-of-drive orientation. As planned, our drive will reach about 27 meters (almost 89 feet), whereas a guarded drive if the terrain was better might have yielded around 50 meters (about 164 feet). After the drive, we’ll take some imaging and do a Mastcam survey to observe soils along the traverse path.

On sol 4340, we planned for two science blocks. The first included a ChemCam AEGIS activity — this will allow the rover to examine its surroundings and pick out some interesting targets for analysis. We will also perform a Navcam dust devil movie to capture any interesting dust activities in the atmosphere. Next, we’ll move into our second science block, which is focused on environmental science. We’ll first take Mastcam tau observations, which will allow us to study and measure the optical depth of the atmosphere, which is often used as a proxy to understand the dust in the atmosphere. We’ll also do some early morning remote science, including Navcam cloud movies at zenith and at suprahorizon.

Written by Remington Free, Operations Systems Engineer at NASA’s Jet Propulsion Laboratory

• Image Download

Explore More

2 min read

Sols 4336-4337: Where the Streets Have No Name

Article


4 days ago

2 min read

Just Keep Roving

Throughout the past week, Perseverance has continued marching up the Jezero crater rim. This steep…

Article


5 days ago

3 min read

Sols 4334-4335: Planning with Popsicles — A Clipper Celebration!

Article


6 days ago

Keep Exploring

Discover More Topics From NASA

Mars

Mars is the fourth planet from the Sun, and the seventh largest. It’s the only planet we know of inhabited…

All Mars Resources

Explore this collection of Mars images, videos, resources, PDFs, and toolkits. Discover valuable content designed to inform, educate, and inspire,…

Rover Basics

Each robotic explorer sent to the Red Planet has its own unique capabilities driven by science. Many attributes of a…

Mars Exploration: Science Goals

The key to understanding the past, present or future potential for life on Mars can be found in NASA’s four…

Powered by WPeMatico

Get The Details…

NASA Reveals Prototype Telescope for Gravitational Wave Observatory

NASA has revealed the first look at a full-scale prototype for six telescopes that will enable, in the next decade, the space-based detection of gravitational waves — ripples in space-time caused by merging black holes and other cosmic sources.

The LISA (Laser Interferometer Space Antenna) mission is led by ESA (European Space Agency) in partnership with NASA to detect gravitational waves by using lasers to measure precise distances — down to picometers, or trillionths of a meter — between a trio of spacecraft distributed in a vast configuration larger than the Sun. Each side of the triangular array will measure nearly 1.6 million miles, or 2.5 million kilometers.

“Twin telescopes aboard each spacecraft will both transmit and receive infrared laser beams to track their companions, and NASA is supplying all six of them to the LISA mission,” said Ryan DeRosa, a researcher at NASA’s Goddard Space Flight Center in Greenbelt, Maryland. “The prototype, called the Engineering Development Unit Telescope, will guide us as we work toward building the flight hardware.”

The Engineering Development Unit Telescope, which was manufactured and assembled by L3Harris Technologies in Rochester, New York, arrived at Goddard in May. The primary mirror is coated in gold to better reflect the infrared lasers and to reduce heat loss from a surface exposed to cold space since the telescope will operate best when close to room temperature.

The prototype is made entirely from an amber-colored glass-ceramic called Zerodur, manufactured by Schott in Mainz, Germany. The material is widely used for telescope mirrors and other applications requiring high precision because its shape changes very little over a wide range of temperatures.

The LISA mission is slated to launch in the mid-2030s.

By Francis Reddy
NASA’s Goddard Space Flight Center, Greenbelt, Md.

Media Contact:
Claire Andreoli
301-286-1940
claire.andreoli@nasa.gov
NASA’s Goddard Space Flight Center, Greenbelt, Md.

Keep Exploring

Discover Related Topics

Missions

Humans in Space

Climate Change

Solar System

Powered by WPeMatico

Get The Details…

Gateway: Life in a Lunar Module

Teams at NASA, ESA (European Space Agency), and Thales Alenia Space, including astronauts Stan Love and Luca Parmitano, came together in Turin, Italy, this summer for a test run of Gateway, humanity’s first space station to orbit the Moon.

The group conducted what is known as human factors testing inside a mockup of Lunar I-Hab, one of four Gateway modules where astronauts will live, conduct science, and prepare for missions to the Moon’s South Pole region. The testing is an important step on the path to launch by helping refine the design of spacecraft for comfort and safety.

Lunar I-Hab is provided by ESA and Thales Alenia Space and is slated to launch on Artemis IV. During that mission, four astronauts will launch inside the Orion spacecraft atop an upgraded version of the SLS (Space Launch System) rocket and deliver Lunar I-Hab to Gateway in orbit around the Moon.

ESA, CSA (Canadian Space Agency), JAXA (Japan Aerospace Exploration Agency), and the Mohammad Bin Rashid Space Centre of the United Arab Emirates are providing major hardware for Gateway, including science experiments, the modules where astronauts will live and work, robotics, and life support systems.

International teams of astronauts will explore the scientific mysteries of deep space with Gateway as part of the Artemis campaign to return to the Moon for scientific discovery and chart a path for the first human missions to Mars and beyond.

Explore More

1 min read

Gateway Stands Tall for Stress Test

The Gateway space station’s Habitation and Logistics Outpost has successfully completed static load testing in…

Article


3 weeks ago

6 min read

NASA’s Artemis IV: Building First Lunar Space Station

Article


7 months ago

2 min read

Gateway: Energizing Exploration

Discover the cutting-edge technology powering Gateway, humanity’s first lunar space station.

Article


2 months ago

Keep Exploring

Discover More Topics From NASA

Space Launch System (SLS)

Orion Spacecraft

Gateway

Human Landing System

Powered by WPeMatico

Get The Details…
Dylan Connell

Industry Supported Battery Passivation Techniques – Request for Information

The National Aeronautics and Space Administration (NASA) Ames Research Center (ARC) on behalf of the Space Technology Mission Directorate’s (STMD) Small Spacecraft Technology (SST) Program and is hereby soliciting information from potential sources for inputs on industry, academia, or government adopted battery passivation techniques. As part of a continual process improvement effort and potential requirement revisions, the NASA Small Spacecraft community, Office of Safety and Mission Assurance, and Orbital Debris Program Office are seeking inputs from industry on battery passivation techniques that are used by industry to satisfy the Orbital Debris Mitigation Standard Practices (ODMSP) requirements 2-2. Limiting the risk to other space systems from accidental explosions and associated orbital debris after completion of mission operations: All on-board sources of stored energy of a spacecraft or upper stage should be depleted or safed when they are no longer required for mission operations or post mission disposal. Depletion should occur as soon as such an operation does not pose an unacceptable risk to the payload. Propellant depletion burns and compressed gas releases should be designed to minimize the probability of subsequent accidental collision and to minimize the impact of a subsequent accidental explosion.

Background

NASA has well-established procedures for passivating power sources on large, highly redundant spacecraft to mitigate debris generation at end-of-life. However, the rise of capable small spacecraft utilizing single-string and Commercial Off-The-Shelf (COTS) components presents challenges. Directly applying passivation strategies designed for redundant systems to these less complex spacecraft can introduce risks and may not be cost-effective for these missions.

Recognizing that the commercial sector has emerged as a leader in Low Earth Orbit (LEO) small satellite operations, NASA seeks to engage with industry, academia, and government spacecraft operators to gain insights into current battery passivation techniques. Understanding industry-adopted practices, their underlying rationale, and performance data will inform NASA’s ongoing efforts to develop safe and sustainable end-of-life procedures for future missions.

NASA invites government, academic, or industry stakeholders, including small satellite operators, manufacturers, and component suppliers, to share information on battery passivation strategies employed in their spacecraft.

Click here for more information.

Powered by WPeMatico

Get The Details…
Sonja Caldwell

NASA Invites Media to Chile Artemis Accords Signing Ceremony

Chile will sign the Artemis Accords during a ceremony at 3 p.m. EDT on Friday, Oct. 25, at NASA’s Headquarters in Washington.

NASA Administrator Bill Nelson will host Aisén Etcheverry, Chile’s minister of science, technology, knowledge and innovation, and Juan Gabriel Valdés, ambassador of Chile to the United States, along with other officials from Chile and the U.S. Department of State.

This event is in-person only. U.S. media and U.S. citizens representing international media organizations interested in attending must RSVP no later than 5 p.m. on Thursday, Oct. 24, to hq-media@mail.nasa.gov. NASA’s media accreditation policy is online.

The signing ceremony will take place at the agency’s Glennan Assembly Room inside NASA Headquarters located at 300 E St. SW Washington.

NASA, in coordination with the U.S. Department of State and seven other initial signatory nations, established the Artemis Accords in 2020. With many countries and private companies conducting missions and operations around the Moon, the Artemis Accords provide a common set of principles to enhance the governance of the civil exploration and use of outer space.

The Artemis Accords reinforce the commitment by signatory nations to the Outer Space Treaty, the Registration Convention, the Rescue and Return Agreement, as well as best practices and norms of responsible behavior for civil space exploration and use.

Learn more about the Artemis Accords at:

https://www.nasa.gov/artemis-accords

-end-

Meira Bernstein / Elizabeth Shaw
Headquarters, Washington
202-358-1600
meira.b.bernstein@nasa.gov / elizabeth.a.shaw@nasa.gov

Powered by WPeMatico

Get The Details…
Roxana Bardan