NASA Selects Firefly for New Artemis Science, Tech Delivery to Moon

NASA Selects Firefly for New Artemis Science, Tech Delivery to Moon

An artist’s concept of Blue Ghost Mission 4 shows Firefly’s Blue Ghost lunar lander and NASA payloads in the lunar South Pole Region, through NASA’s CLPS (Commercial Lunar Payload Services) initiative.
This artist’s concept of Blue Ghost Mission 4 shows Firefly’s Blue Ghost lunar lander and NASA payloads in the lunar South Pole Region, through NASA’s CLPS (Commercial Lunar Payload Services) initiative.
Credit: Firefly Aerospace

NASA has awarded Firefly Aerospace of Cedar Park, Texas, $176.7 million to deliver two rovers and three scientific instruments to the lunar surface as part of the agency’s CLPS (Commercial Lunar Payload Services) initiative and Artemis campaign to explore more of the Moon than ever before.

This delivery is the first time NASA will use multiple rovers and a variety of stationary instruments, in a collaborative effort with the CSA (Canadian Space Agency) and the University of Bern, to help us understand the chemical composition of the lunar South Pole region and discover the potential for using resources available in permanently shadowed regions of the Moon.

“Through CLPS, NASA is embracing a new era of lunar exploration, with commercial companies leading the way,” said Joel Kearns, deputy associate administrator for exploration, Science Mission Directorate, NASA Headquarters in Washington. “These investigations will produce critical knowledge required for long-term sustainability and contribute to a deeper understanding of the lunar surface, allowing us to meet our scientific and exploration goals for the South Pole region of the Moon for the benefit of all.”

Under the new CLPS task order, Firefly is tasked with delivering end-to-end payload services to the lunar surface, with a period of performance from Tuesday to March 29, 2030. The company’s lunar lander is targeted to land at the Moon’s South Pole region in 2029.

This is Firefly’s fifth task order award and fourth lunar mission through CLPS. Firefly’s first delivery successfully landed on the Moon’s near side in March 2025 with 10 NASA payloads. The company’s second mission, targeting a launch in 2026, includes a lunar orbit drop-off of a satellite combined with a delivery to the lunar surface on the far side. Firefly’s third lunar mission will target landing in the Gruithuisen Domes on the near side of the Moon in 2028, delivering six experiments to study that enigmatic lunar volcanic terrain.

“As NASA sends both humans and robots to further explore the Moon, CLPS deliveries to the lunar South Pole region will provide a better understanding of the exploration environment, accelerating progress toward establishing a long-term human presence on the Moon, as well as eventual human missions to Mars,” said Adam Schlesinger, manager of the CLPS initiative at NASA’s Johnson Space Center in Houston.

The rovers and instruments that are part of this newly awarded flight include:

  • MoonRanger is an autonomous microrover that will explore the lunar surface. MoonRanger will collect images and telemetry data while demonstrating autonomous capabilities for lunar polar exploration. Its onboard Neutron Spectrometer System instrument will study hydrogen-bearing volatiles and the composition of lunar regolith, or soil.
    Lead development organizations: NASA’s Ames Research Center in California’s Silicon Valley, and Carnegie Mellon University and Astrobotic, both in Pittsburgh.
  • Stereo Cameras for Lunar Plume Surface Studies will use enhanced stereo imaging photogrammetry, active illumination, and ejecta impact detection sensors to capture the impact of the rocket exhaust plume on lunar regolith as the lander descends on the Moon’s surface. The high-resolution stereo images will help predict lunar regolith erosion and ejecta characteristics, as bigger, heavier spacecraft and hardware are delivered to the Moon near each other in the future.
    Lead development organization: NASA’s Langley Research Center in Hampton, Virginia. 
  • Laser Retroreflector Array is an array of eight retroreflectors on an aluminum support structure that enables precision laser ranging, a measurement of the distance between the orbiting or landing spacecraft to the reflector on the lander. The array is a passive optical instrument, which functions without power, and will serve as a permanent location marker on the Moon for decades to come.
    Lead development organization: NASA’s Goddard Space Flight Center in Greenbelt, Maryland.
  • A CSA Rover is designed to access and explore remote South Pole areas of interest, including permanently shadowed regions, and to survive at least one lunar night. The CSA rover has stereo cameras, a neutron spectrometer, two imagers (visible to near-infrared), a radiation micro-dosimeter, and a NASA-contributed thermal imaging radiometer developed by the Applied Physics Laboratory. These instruments will advance our understanding of the physical and chemical properties of the lunar surface, the geological history of the Moon, and potential resources such as water ice. It will also improve our understanding of the environmental challenges that await future astronauts and their life support systems.
    Lead development organization: CSA.
  • Laser Ionization Mass Spectrometer is a mass spectrometer that will analyze the element and isotope composition of lunar regolith. The instrument will utilize a Firefly-built robotic arm and Titanium shovel that will deploy to the lunar surface and support regolith excavation. The system will then funnel the sample into its collection unit and use a pulsed laser beam to identify differences in chemistry compared to samples studied in the past, like those collected during the Apollo program. Grain-by-grain analyses will provide a better understanding of the chemical complexity of the landing site and the surrounding area, offering insights into the evolution of the Moon.
    Lead development organization: University of Bern in Switzerland.

Through the CLPS initiative, NASA purchases lunar landing and surface operations services from American companies. The agency uses CLPS to send scientific instruments and technology demonstrations to advance capabilities for science, exploration, or commercial development of the Moon, and to support human exploration beyond to Mars. By supporting a robust cadence of lunar deliveries, NASA will continue to enable a growing lunar economy while leveraging the entrepreneurial innovation of the commercial space industry.

To learn more about CLPS and Artemis, visit:

https://www.nasa.gov/clps

-end-

Alise Fisher
Headquarters, Washington
202-358-2546
alise.m.fisher@nasa.gov

Nilufar Ramji   
Johnson Space Center, Houston
281-483-5111
nilufar.ramji@nasa.gov

Share

Details

Last Updated

Jul 29, 2025

Powered by WPeMatico

Get The Details…
Tiernan P. Doyle

Adam and Hirsa Present Research on the Ring-Sheared Drop

Adam and Hirsa Present Research on the Ring-Sheared Drop

3 min read

Adam and Hirsa Present Research on the Ring-Sheared Drop

A silver laboratory structure with wires and controls, connected to two laptops
Abnormal fibrous, extracellular, proteinaceous deposits found in organs and tissues are associated with neurodegenerative diseases such as Alzheimer’s. (“Amyloid fibril formation in microgravity: Distinguishing interfacial and flow effects” NNX13AQ22G). The Ring Sheared Drop investigation studies the biophysics of protein amyloidogenesis in the absence of gravity in order to study fibril formation at fluid interfaces, in the absence of solid walls.
NASA

Researchers across Space Biology and Physical Sciences come together for a special presentation at the May PSI Users Group.

The Ring-Sheared Drop (RSD) is a Microgravity Science Glovebox experiment that launched in July 2019 to the ISS to study shearing flow in the absence of solid walls. The major goals of this project were to adapt and use the RSD module to develop and test predictive models of non-Newtonian flow of high-concentration proteins at the interface.

At the May Physical Sciences Informatics (PSI) User Group, Dr. Joe Adam, Research Scientist at Rensselaer Polytechnic Institute and University Payload Director of the RSD module, presented, “Protein Solution Hydrodynamic Studies in the Ring-Sheared Drop” detailing the history of RSD, research campaigns and data to be released in PSI. This investigation was led by Principal Investigator, Prof. Amir Hirsa of Rensselaer Polytechnic Institute.

The ring-sheared drop interfacial bioprocessing of pharmaceuticals-I (RSD-IBP-I) campaign aimed to study non-Newtonian interfacial hydrodynamics of the blood transport proteins bovine serum albumin (BSA) and human serum albumin (HSA) in microgravity. Specifically, scientific aims focus on the effects of protein primary structure (BSA or HSA), protein concentration and interfacial shear rate on microgravity fluid flow, measured using velocimetry of hollow glass microsphere tracer particles within protein samples. This campaign intended to confer improved understanding of interfacial protein flows in relation to physiology, the environment, and industry relevant to both spaceflight and Earth. Results from this line of research could have applications to in situ pharmaceutical production, tissue engineering, and diseases such as Alzheimer’s, Parkinson’s, infectious prions, and type 2 diabetes.

To encourage collaboration across common areas of BPS’s Physical Sciences and Biology research, PSI invited Ryan Scott, ALSDA lead Scientist, and members of the ADBR (Alz Disease & Brain Resilience) and Parkinson’s AWG subgroups to attendee this month’s meeting which fueled discussions and led to several connections. During the discussions the two relevant collaborative publications that were shared are:

  • McMackin, P., Adam, J., Griffin, S. et al. Amyloidogenesis via interfacial shear in a containerless biochemical reactor aboard the International Space Station. npj Microgravity 8, 41 (2022). https://doi.org/10.1038/s41526-022-00227-2
  • Nilufar Ali paper resulting in part from a collaboration within the Parkison’s AWG subgroup

Ali, N., Beheshti, A. & Hampikian, G. Space exploration and risk of Parkinson’s disease: a perspective review. npj Microgravity 11, 1 (2025). https://doi.org/10.1038/s41526-024-00457-6

Ring-Sheared Drop – Interfacial Bioprocessing of Pharmaceuticals(RSD-IBP-I) is now accessible in PSI. http://doi.org/10.60555/smat-bb74

Share

Details

Last Updated
Jul 29, 2025

Related Terms

Powered by WPeMatico

Get The Details…

NASA Drop Test Supports Safer Air Taxi Designs

NASA Drop Test Supports Safer Air Taxi Designs

A white aircraft body with small black dots is hoisted in the air by cables. There are several test dummies inside of the aircraft. The aircraft does not hang far off of the ground. Three workers with hardhats remove pink foam squares from underneath the aircraft. Behind the aircraft is a large white board to measure the height, which includes many black squares with small numbers inside some of the bottom squares.
An aircraft body modeled after an air taxi with weighted test dummies inside is being prepared for a drop test by researchers at NASA’s Langley Research Center in Hampton, Virginia. The test was completed June 26, 2025, at Langley’s Landing and Impact Research Facility. The aircraft was dropped from a tall steel structure, known as a gantry, after being hoisted about 35 feet in the air by cables. NASA researchers are investigating aircraft materials that best absorb impact forces in a crash.
NASA/Mark Knopp

As the aviation industry works to design air taxis and other new electric aircraft, there’s a growing need to understand how the materials behave. That’s why NASA is investigating potential air taxi materials and designs to best protect passengers in the event of a crash.

On June 26, 2025, at NASA’s Langley Research Center in Hampton, Virginia, researchers dropped a full-scale aircraft body modeled after an air taxi from a tall steel structure, known as a gantry.

The NASA researchers behind this test and a previous one in late 2022 investigated materials that best absorb impact forces, generating data that will enable manufacturers to design safer advanced air mobility aircraft.

Image Credit: NASA/Mark Knopp

Powered by WPeMatico

Get The Details…
Monika Luabeya

NASA Astronaut Kate Rubins, First to Sequence DNA in Space, Retires

NASA Astronaut Kate Rubins, First to Sequence DNA in Space, Retires

Astronaut Kate Rubins
NASA Astronaut Kate Rubins
NASA

NASA astronaut and microbiologist Kate Rubins retired Monday after 16 years with the agency. During her time with NASA, Rubins completed two long-duration missions aboard the International Space Station, logging 300 days in space and conducting four spacewalks.
 
“I want to extend my sincere gratitude to Kate for her dedication to the advancement of human spaceflight,” said Steve Koerner, acting director of NASA’s Johnson Space Center in Houston. “She is leaving behind a legacy of excellence and inspiration, not only to our agency, but to the research and medical communities as well. Congratulations, Kate, on an extraordinary career.”
 
Rubins’ first mission to the orbiting laboratory began in July 2016, aboard the first test flight of the new Soyuz MS spacecraft. As part of Expedition 48/49, she contributed to more than 275 scientific experiments, including molecular and cellular biology research, and she was the first person to sequence DNA in space. Her work enabled significant advances with in-flight molecular diagnostics, long-duration cell culture, and the development of molecular biology tools and processes, such as handling and transferring small amounts of liquids in microgravity. Rubins also led the integration and deployment of biomedical hardware aboard the space station, supporting crew health and scientific research in space and on Earth.
 
She again launched in October 2020, aboard a Soyuz spacecraft from the Baikonur Cosmodrome in Kazakhstan, taking part in Expedition 63/64. Alongside her crewmates, Rubins spent hundreds of hours working on new experiments and furthering research investigations conducted during her mission, including heart research and multiple microbiology studies. She also advanced her work on DNA sequencing in space, which could allow future astronauts to diagnose illness or identify microbes growing aboard the station or during future exploration missions.
 
“From her groundbreaking work in space to her leadership on the ground, Kate has brought passion and excellence to everything she’s done,” said Joe Acaba, chief of the Astronaut Office at NASA Johnson. “She’s been an incredible teammate and role model. We will miss her deeply, but her impact will continue to inspire.”
 
In addition to her flight assignments, Rubins served as acting deputy director of NASA’s Human Health and Performance Directorate, where she helped guide strategy for crew health and biomedical research. More recently, she contributed to developing next-generation lunar spacesuits, helping prepare for future Artemis missions to the Moon.
 
 
Before her selection as an astronaut in 2009, Rubins received a bachelor’s degree in molecular biology from the University of California, San Diego, and a doctorate in cancer biology from Stanford University Medical School’s Biochemistry Department and Microbiology and Immunology Department. After returning from her second space mission, Rubins commissioned as a major in the U.S. Army Reserve, serving as a microbiologist in the Medical Service Corps. She currently holds the role of innovation officer with the 75th U.S. Army Reserve Innovation Command’s MedBio Detachment, headquartered in Boston. 

A frequent keynote speaker at scientific, educational, and industry events on space biology, biomedical engineering, and human exploration, Rubins has advocated for NASA’s scientific and exploration missions. As she transitions from government service, she remains committed to advancing innovation at the intersection of biology, technology, and space.
 
“It has been the honor of a lifetime to live and work in space,” said Rubins. “I am grateful for the extraordinary advances at NASA, and it was a privilege to serve and contribute to something so meaningful. The mission of exploration continues, and I can’t wait to watch this nation do what once seemed impossible.”
 

Learn more about how NASA explores the unknown and innovates for the benefit of humanity at:

https://www.nasa.gov/

-end-

Raegan Scharfetter

Johnson Space Center, Houston

281-910-4989

raegan.r.scharfetter@nasa.gov

Powered by WPeMatico

Get The Details…
Wendy K. Avedisian

Curiosity Blog, Sols 4611-4613: Scenic Overlook

Curiosity Blog, Sols 4611-4613: Scenic Overlook

2 min read

Curiosity Blog, Sols 4611-4613: Scenic Overlook

A grayscale photo from the Martian surface shows rocky, uneven, light-gray terrain that slopes downward, away from the rover. Parts of the rover are visible in the bottom of the frame, and the downward slope extends from the bottom of the frame toward the top of the frame, with a ridge line tracing the descent.
NASA’s Mars rover Curiosity acquired this image, sitting on top of the distinctive ridge-and-hollow terrain of the boxwork-forming unit for a panoramic view, on July 24, 2025. Curiosity used its Right Navigation Camera on Sol 4609, or Martian day 4,609 of the Mars Science Laboratory mission, at 21:29:43 UTC.
NASA/JPL-Caltech

Written by Lucy Lim, Planetary Scientist at NASA’s Goddard Space Flight Center

Earth planning date: Friday, July 25, 2025

A 23-meter drive (about 75 feet) brought Curiosity to today’s planned “look-about” spot. The highlight of the plan will be the 360-degree Mastcam panorama that will document the ridge-and-hollow topography of the boxwork-forming unit we’ve been exploring, in addition to overlying stratigraphy in some of the nearby buttes. The right-angle ridge pattern is quite prominent in the HiRISE orbital imaging, which enabled us to plan for this stop. It has been 70 sols since the last panorama, and the rover has driven quite some distance in that time!

Additional detailed imaging was planned with the ChemCam remote imager (RMI) and Mastcam high-resolution M100: mosaics will cover the exposed strata underneath the ridge we’re planning to drive on (“Arequipa Airport”), two linear fractures, one parallel to the large ridge and one cross-cutting it (“Laguna de Salinas” and “Laguna Santa Rosa”), some troughs around a nearby light-toned float block (“Arubai”), and the Uyuni butte in the middle distance.

The bedrock texture here was a noticeable change from the previous workspace, with a knobbly oriented texture interspersed occasionally with platier exposures. Geochemical measurements were planned with the ChemCam LIBS to complement the auto-targeted post-drive AEGIS measurement: “La Coca” on a block that appeared to show unusual colors, and “El Algodón” on a knobbly textured chunk of bedrock. APXS geochemistry was planned with dust removal on the “Yura Tuff” knobbly target and without dust removal on the “Tipnis” target. MAHLI will also provide close-up imaging on the two APXS targets.

For the modern Martian environment, it’s still the cloudy season at Gale so we are planning several cloud-related activities. The Mastcam sky survey will measure abundances of atmospheric dust and water ice, whereas a special cloud altitude observation will include video of clouds and their shadows so that the altitudes and velocities of the clouds and related winds can be calculated. A separate short movie will search for dust lifting (dust devil) activity. Finally, the usual passive REMS and DAN observations will monitor the temperature, humidity, and neutron environment at Curiosity’s current location.

Share

Details

Last Updated
Jul 28, 2025

Related Terms

Powered by WPeMatico

Get The Details…