![\"\"](\"https:\/\/www.nasa.gov\/wp-content\/uploads\/2026\/10\/combineda1anda2-heatshield4k.jpg\")
<\/a><\/figure>NASA\u2019s Artemis II mission sent four astronauts around the Moon and brought them safely back to Earth, laying a foundation for crewed flights to the Moon\u2019s surface. <\/p>\n
Additional engineering data analysis of the Orion spacecraft\u2019s heat shield confirmed initial data showing the heat shield performed as expected.\u00a0\u00a0<\/p>\n
In particular, NASA measured whether the thermal protection system effectively safeguarded the crew and Orion systems as the spacecraft reentered Earth\u2019s atmosphere. This test flight was the first time astronauts flew aboard Orion.\u00a0<\/p>\n
Orion reached a maximum velocity of 39 times the speed of sound and experienced external temperatures exceeding 4,000 degrees Fahrenheit at its peak, all while the four astronauts inside Orion stayed relatively cool with a cabin temperature in the mid-70 degree Fahrenheit range during their return to Earth from the Moon.\u00a0\u00a0<\/p>\n
After NASA\u2019s thorough analysis of Artemis I heat shield findings<\/a>, informed by extensive arc jet material testing at NASA\u2019s Ames Research Center in California\u2019s Silicon Valley, the agency modified Orion\u2019s reentry trajectory for Artemis II by shortening the maximum downrange distance the spacecraft could fly between when it entered Earth\u2019s atmosphere and splashed down in the Pacific Ocean. Analysis prior to the mission showed that limiting downrange distance would limit how long the spacecraft\u2019s heat shield spent in the temperature range at which the Artemis I heat shield phenomenon occurred.\u00a0\u00a0<\/p>\n The spacecraft reentered with precision, entering within only 192 feet of its targeted entry interface, and successfully splashed down only 0.59 miles from the predicted landing site off the coast of San Diego. Initial inspections<\/a> of the thermal protection system, including diver imagery of the spacecraft\u2019s heat shield taken just after splashdown and further inspections on the recovery ship, found it performed as expected, with a significant reduction in the amount of cracks and char loss as compared to Artemis I.\u00a0\u00a0<\/p>\n Upon the spacecraft\u2019s return to NASA\u2019s Kennedy Space Center in Florida after the Moon mission, thermal protection system experts began additional examination of the heat shield, made of 186 unique blocks of an ablative material called Avcoat. The heat shield was then transported to NASA\u2019s Marshall Space Flight Center in Huntsville, Alabama, where work on sample extraction and internal x-ray scans began in August to provide further engineering insight into the system and behavior of the material.<\/p>\n A thorough post-flight assessment review found that Orion\u2019s aerodynamic and aerothermal performance, including the heat shield and backshell thermal protection system, was in line with engineering predictions based on pre-flight analyses and ground testing. The shorter allowable down range during entry reduced the cracking and char loss experienced on the Artemis II heat shield relative to the Artemis I heat shield by a factor of ten, proving the effectiveness of the trajectory modification. Engineers found only nine spots of char loss of varying sizes on the Artemis II heat shield dish, compared to 103 during Artemis I.\u00a0<\/p>\n The analysis also showed that Orion\u2019s robust heat shield design showed consistency from Artemis I to Artemis II, evident by the performance of system features such as the seams between the heat shield Avcoat blocks and the Avcoat surrounding the heat shield compression pad separation bolts.\u00a0<\/p>\n Post-flight inspection of Orion\u2019s backshell, the protective cover on the sloped sides of the crew module made up of 1,300 ceramic tiles, showed expected performance across the crew module surface. Visual inspections indicated backshell features designed to seal and protect penetrations such as windows, vents, thrusters, and the side hatch also met expectations, with no signs of overheating observed.\u00a0<\/p>\n The team also performed post-flight laser scans of the heat shield surface and is comparing this data to pre-flight measurements to determine material recession, which will then be compared to analysis predictions. Engineers are continuing with heat shield sample extraction at NASA Marshall and subsequent material test and assessment and thermal analysis, to support long-term heat shield development, manufacturing efforts, and data capture.\u00a0<\/p>\n Orion\u2019s performance and the team\u2019s analysis on Artemis II reflect system robustness, capability to support crew, and critical insights gathered that will enhance the Artemis III mission and beyond. Following the extensive Artemis I heat shield investigation, upgrades were made to the heat shield design for Artemis III to achieve uniformity and consistent permeability of the Avcoat blocks. Technicians attached the heat shield for the Artemis III Orion crew module at NASA Kennedy in early July, and the Orion crew and service modules were joined at the end of July. The spacecraft has since been successfully powered up for the first time, enabling engineers to check all connection lines between the two modules are working as planned.<\/p>\n NASA continues to advance toward Artemis III as teams ready the Orion spacecraft for next year\u2019s mission in low Earth orbit. NASA will launch the SLS (Space Launch System) rocket and Orion spacecraft with NASA astronauts Randy Bresnik, Frank Rubio, Andre Douglas, and ESA (European Space Agency) Luca Parmitano, to rendezvous with human lander test articles from Blue Origin and SpaceX to demonstrate critical systems and operations needed for future lunar landings, beginning with Artemis IV in 2028.<\/p>\n \n Powered by WPeMatico<\/a><\/small><\/p>\n Get The Details…<\/a> NASA\u2019s Artemis II mission sent four astronauts around the Moon and brought them safely back to Earth, laying a foundation for crewed flights to the Moon\u2019s surface. Additional engineering data analysis of the Orion spacecraft\u2019s heat shield confirmed initial data showing the heat shield performed as expected.\u00a0\u00a0 In particular, NASA measured whether the thermal protection [\u2026] Continue reading <\/a><\/figure><\/a><\/figure><\/a><\/figure><\/a><\/figure>
\nElyna Niles-Carnes <\/p>\n","protected":false},"excerpt":{"rendered":"