![\"An](\"https:\/\/assets.science.nasa.gov\/dynamicimage\/assets\/science\/cds\/science-enabling-technology\/technology-highlights\/2026\/Monje_Image_1a.jpg?w=1210&h=1617&fit=clip&crop=faces%2Cfocalpoint\")
<\/a><\/figure>Built with funding from NASA\u2019s Earth Science Technology Office Instrument Incubator Program<\/a>, CloudCube transmits and receives Ka-, W-, and G-band signals, making it the first compact radar system capable of simultaneously probing meteorological targets at wavelengths spanning approximately one to ten millimeters. Researchers will be able to combine information from the three signals to learn more about the initiation and evolution of precipitation, as well as cloud microphysics and radiative properties.<\/p>\n \u201cWe\u2019re making a low-power, low-mass instrument to facilitate new cost-efficient missions for atmospheric observations. Building a multi-frequency radar, especially at G-band, is very novel,\u201d said Raquel Rodriguez Monje, a systems engineer at JPL and principal investigator for CloudCube. <\/p>\n Each of CloudCube\u2019s three signals observes a different element of cloud physics. Ka-band radar signals are ideal for collecting precipitation profiles; W-band radar signals are preferred for measuring cloud particles that give rise to precipitation; and G-band radar signals, which have never been collected from a space-based instrument, are ideal for measuring ice and liquid water content inside very light clouds (a paper describing this measurement can be found here<\/a>).<\/p>\n Probing the atmosphere simultaneously with three signals allows researchers to collect data on all these cloud features at once, which is valuable for improving weather forecasts and especially climate modeling. CloudCube leverages innovations in millimeter-wave hardware to pack three radar modules\u2013one for each signal\u2013within a single compact system. <\/p>\n One CloudCube innovation concerns the specialized components required to transmit G-band power from a compact, low-power instrument. The detection of cloud signals requires high transmit power, which CloudCube achieves by combining the outputs of multiple high-efficiency frequency-multiplication devices that allow the instrument to generate hundreds of milliWatts at 240 GHz. Another innovation of CloudCube is that it was designed to use as few radio frequency components as possible to reduce its mass and power consumption, which could lower the cost of future Earth-observing orbital instruments. <\/p>\n Flying an instrument equipped with G-band radar in space will be a new capability and will allow researchers to achieve greater spatial resolution and sensitivity in the study of cloud microphysical processes. <\/p>\n \u201cBasically, we\u2019re weighing clouds using these combinations of frequencies in a way that we couldn\u2019t do before we had the G-band,\u201d said Matt Lebsock, a researcher at JPL and co-investigator for CloudCube.<\/p>\n The instrument has been tested in the field. A ground-based prototype of CloudCube\u2019s G-band channel operated continuously for 11 months during the Department of Energy\u2019s Cloud and Precipitation Experiment at Kennaook (CAPE-K) campaign. CloudCube also participated in the Eastern Pacific Cloud Aerosol Precipitation Experiment, a ground campaign sponsored by the Department of Energy. A paper describing the results of that experiment can be found <\/a>here.<\/a><\/p>\n Most recently, CloudCube successfully operated all three frequency bands from NASA\u2019s Gulfstream III aircraft and collected its first airborne observations of snowfall as part of the North American Upstream Feature-Resolving and Tropopause Uncertainty Reconnaissance Experiment campaign<\/a>\u2014a NASA-funded campaign designed to improve forecasts of high-impact winter weather. The CloudCube team is currently calibrating and processing the data for public release. <\/p>\n For additional details, see the entry for this project on <\/a>NASA TechPort.<\/strong><\/a><\/strong> <\/p>\n Project Lead:<\/strong> <\/strong>Dr. Raquel Rodriguez Monje, NASA\u2019s Jet Propulsion Laboratory <\/p>\n Sponsoring Organization<\/strong>:<\/strong> <\/a>NASA\u2019s Earth Science Technology Office Instrument Incubation Program <\/p>\n Powered by WPeMatico<\/a><\/small><\/p>\n Get The Details…<\/a><\/p>\n","protected":false},"excerpt":{"rendered":" A compact, multifrequency radar built by a team at NASA\u2019s Jet Propulsion Laboratory will make it easier to collect information about dynamic cloud systems. Called CloudCube, this new instrument simultaneously probes the atmosphere with three radar signals, spanning 36 to 240 GHz, for optimized sensitivity to a wide range of water droplet and ice particle sizes.\u00a0 Continue reading <\/a><\/figure>