15 min read<\/p>\n
Preparations for Next Moonwalk Simulations Underway (and Underwater)<\/h1>\n<\/div>\n<\/div>\n<\/div>\n
At the end of 2022, 65 percent of the Western United States was in severe drought, the result of a two decades long mega drought in the Colorado River Basin that had captured headlines around the world.\u00a0<\/p>\n<\/p>\n
However, it was flooding, not drought, that was making headlines when we began our research for this story about OpenET<\/a>, a revolutionary new online platform geared towards helping farmers and water managers monitor and reduce water use in watersheds where supplies were not keeping up with demand.\u00a0\u00a0<\/p>\n<\/p>\n The start of 2023 brought flooding to many counties in California, leaving 68 percent of the state with suddenly little to no drought. And caused Forrest Melton, the NASA Project Scientist for OpenET and Associate Program Manager for agriculture and water resources with the NASA Earth Action program, to pause our video interview after a tree fell down outside his Bay Area home on a rainy day in March, 2023.\u00a0<\/p>\n<\/p>\n Coming online again after calling the fire department, Melton didn\u2019t seem all too optimistic that the wet conditions would last. \u201cCalifornia tends to swing between the two extremes of drought and flood,\u201d Melton said. He referenced the 2016\/17 winter <\/a>which had particularly high precipitation but was followed by dry conditions during the following years, before the relief brought by the heavy rains, and flooding, in early 2023.\u00a0<\/p>\n<\/p>\n According to NOAA\u2019s National Integrated Drought Information System<\/a> it will take more than one wet winter to replenish groundwater in many parts of the western United States. Groundwater levels across the California Central Valley and many parts of the Ogallala Aquifer continue to decline. The need for better water management remains essential, and yet the data necessary to support new approaches has not been broadly available.\u00a0<\/p>\n<\/p>\n Enter the OpenET project, a multi-disciplinary, collaborative effort to make satellite-based evapotranspiration (ET) data available to the public. Melton describes the project as providing invaluable and scientifically robust data at all scales, \u201cthat can be used to support day to day decision making and long range planning to try to solve some really long standing and important water management challenges in the West.\u201d<\/p>\n<\/p>\n Evapotranspiration is the combined process of evaporation and transpiration, both of which transfer water from the land surface to the atmosphere as water vapor. Evaporation transforms water from the surface of the ground or bodies of water into water vapor, while transpiration is water vapor that is evaporated from plant tissues and escapes through the stomata, the tiny pores in plant leaves and stems. It is a process that is happening all around us almost all the time, but because water vapor is invisible to the human eye, it is very hard to measure on the ground. \u00a0<\/p>\n To understand the effect evapotranspiration has on a local water cycle, picture a large decorative fountain. Typically, these fountains recycle the same water over and over. As a fountain runs, water is pumped out of the fountain heads, falls back into the fountain\u2019s basin, and then flows back through the pipe system before starting the process all over again. We can think of the water remaining within this fountain\u2019s local water system as non-consumptive<\/em> water use. Some water, however, will be lost from the fountain\u2019s local water system by evaporating from the pool\u2019s surface or mist from the fountain\u2019s spray.<\/p>\n<\/p>\n Imagine the fountain also has lily pads growing in its basin. The lily pads will use the fountain\u2019s water to survive and grow, losing some of that water to transpiration. The total water lost is evapotranspiration, and is considered consumptive<\/em> water use, because it cannot be reused by the fountain. Tracking evapotranspiration can tell you how much water is removed or \u201cdepleted\u201d from a local water system, and how much water needs to be added back in to support plant growth and maintain a healthy balance between water supply and water use. If too much water leaves the fountain, it will stop running. If too much water is added, it will overflow.\u00a0\u00a0<\/p>\n<\/p>\n These concepts can be applied more broadly to the hydrologic cycle as a whole, and\u00a0evapotranspiration data can play an important part in designing and implementing sustainable water management practices to combat larger issues like drought, as well as both short and long-term reductions in water availability. Historically, ET data have been obtained from ground-based instruments and methods, such as weighing lysimeters, which weigh soil and plants to track the water volume lost by evaporation or transpiration. Another common method is called eddy covariance, which calculates the amount of water vapor transported away from the land surface by wind eddies as they move across the land surface. But both are expensive and difficult to install and maintain, and measurements are only representative of a small portion of an individual agricultural field. It is cost prohibitive to collect these measurements over larger areas.\u00a0<\/p>\n<\/p>\n The OpenET team saw the important niche left open by traditional evapotranspiration measurement methods and filled it. They built upon decades of research funded by NASA, USDA and USGS and developed a new platform that can take easily accessible and already available data from satellite programs, like Landsat, and combine it with weather data to calculate the ET for every quarter acre of land. Satellites can record information like the Earth\u2019s surface temperature and how much of the incoming light from the sun is being reflected back out to space. OpenET is able to use physically-based mathematical models to combine the satellite and weather data and output accurate data on evapotranspiration rates and volumes.\u00a0<\/p>\n<\/p>\n This information is then made easily accessible through OpenET\u2019s Data Explorer, a free web-based tool that allows anyone with an internet connection to access the data OpenET provides. Users begin by selecting an area of interest from a map of the western United States that provides data at the satellite resolution of a quarter-acre, and also broken down into known areas of interest and individual agricultural fields, each color coded with a heat map of evapotranspiration. Cooler colors indicate higher rates of evapotranspiration while warmer colors indicate lower rates. <\/strong>Users can zoom into specific areas on the map, and with just a click, a chart pops up showing the evapotranspiration trends for a given area, for the current year and the past five years.\u00a0<\/p>\n<\/p>\n The chart can show monthly ET trends, useful for understanding seasonal fluctuations, and also cumulative trends, useful for understanding year-to-year changes in evapotranspiration. \u201cThe OpenET team took a user-driven design approach from the beginning, and each element of the Data Explorer and the open data services is there because a water manager or farmer asked for it,\u201d Melton explained. As we played around with the map, it became apparent how much work was put into developing this project. Scientists needed to improve models and assess the accuracy of data, programmers had to develop the user interface and data services, designers needed to make the interface intuitive enough to be impactful, agriculture and environmental groups needed to help validate the model\u2019s accuracy, and users of all types needed to provide requirements and then test the product to make sure their needs were actually met.\u00a0<\/p>\n<\/p>\n The OpenET consortium includes NASA, USGS, USDA Agricultural Research Service (ARS), Environmental Defense Fund (EDF), Google Earth Engine, California State University Monterey Bay (CSUMB), Desert Research Institute (DRI), Habitat Seven, Chapman University, Cornell University, University of Nebraska-Lincoln and close to a dozen other universities and experts across the U.S. NASA Ames Research Center and CSUMB have played key roles in the scientific and technical leadership of the effort from the outset, working closely with DRI, EDF and the recently formed non-profit OpenET, Inc. In addition, over 100 partners from the water management, agriculture and conservation community provided user requirements and assisted with the design and testing of the OpenET platform and tools.<\/p>\n<\/p>\n \u201cOpenET would not be possible without the contributions of each one of those partners,\u201d Melton said. \u201cBoth on the implementation side and those who are translating the data from OpenET into solutions to long standing challenges.\u201d\u00a0<\/p>\n<\/p>\n Models like those built into OpenET can be extremely useful tools for understanding patterns in ET and water use, but are only helpful if their accuracy is known. The OpenET science team recently completed the largest accuracy assessment to date for field-scale satellite-based ET data, comparing the satellite data to ground-based measurements at more than 150 sites across the U.S. Led by John Volk of the Desert Research Institute, the study was published in Nature Water earlier this year. A key finding was that across all sites, an ensemble value computed from six different ET models performed the best overall, leveraging the strengths of each individual satellite-driven model.\u00a0<\/p>\n<\/p>\n However, the study also found that some models performed best for particular crop types or regions, which is important information for water managers and farmers who need the most accurate data possible. Publishing the results as an open access study with all data and analysis made publicly available was also important to build trust in the data. While the study highlighted some limitations of the models and priorities for future research, the rigorous and reproducible accuracy assessment helps to build user confidence that they can use the data, while being aware of the expected accuracy for different applications of the data.\u00a0\u00a0<\/p>\n<\/p>\n<\/p>\n OpenET has already contributed to one significant win for farmers that affects how water use will be monitored and reported in the Sacramento-San Joaquin Delta.\u00a0<\/p>\n<\/p>\n This inland river delta covers 750,000 acres and is an important water resource in California, but one where accelerated demand combined with habitat loss and water quality issues has led to major concerns. In the Delta, large portions of the agricultural land are below sea level. Levees protect the fields and contain the river channels that supply water for irrigation. In 2023, the state began requiring farmers to maintain a water meter or measuring device on each diversion, where water is diverted from a river for irrigation. However, this measurement proved challenging and costly as there are thousands of diversions in the Delta, and the measuring equipment was inaccurate and difficult to maintain in this environment. In addition, water users also had to pay for meters at the locations where water that drained from the fields was pumped back over the levees and into the river channels.<\/p>\n<\/p>\n \u201cMostly, what the state was interested in was the consumptive use: how much (water) was actually removed from the supply in that region,\u201d Melton said. \u201cSo, it\u2019s the perfect place for using OpenET because evapotranspiration really is the majority of the consumptive use in the Delta, if not all of it.\u201d<\/p>\n<\/p>\n After the launch of OpenET, farmers in the Delta worked with the Delta Watermaster, the California State Water Resources Control Board, the OpenET team and the Delta Measurement Consortium to develop an alternative compliance plan that used OpenET data to help streamline the water use required reporting for this complex region. Once the alternative compliance plan was approved, Forrest Melton and Will Carrara of NASA worked with the state Water Resources Control Board, the Delta Watermaster and water management agencies, and Jordan Harding of HabitatSeven to implement this solution. The Delta Alternative Compliance Plan<\/a>, also known as the Delta ACP, allows farmers to use OpenET data to estimate their water usage; enabling farmers to complete their use reports in a matter of minutes.\u00a0<\/p>\n<\/p>\n \u201cIt\u2019s the first time that satellite-based evapotranspiration data has been automatically integrated with a state-managed water reporting system,\u201d Melton said.\u00a0<\/p>\n Last year, more than 70% of farmers in the Bay-Delta region chose to use OpenET and to report their water use through the Delta ACP website, and they expect this percentage to continue to increase over time.\u00a0<\/p>\n<\/p>\n \u201cThe best part is that it is saving farmers hundreds of hours on preparing and submitting reports, avoiding millions of dollars in costs for farmers to deploy and maintain meters, and giving the state consistent and reproducible data on water use that has been reviewed and approved by the water user,\u201d Melton said.\u00a0<\/p>\n<\/p>\n According to Delta Watermaster, Jay Ziegler, this approach has a clear benefit in the unique water flow setting of the Delta.\u00a0\u201cIn reality, OpenET \u2013 and the use of publicly accessible data measuring ET is the only way to really discern consumptive use of water in the Delta on a reliable basis,\u201d Ziegler said. \u201cCandidly, we don\u2019t really have a viable \u201cplan B\u201d in the absence of applying Open ET for water use reporting.\u201d<\/p>\nWhat is Evapotranspiration?<\/h2>\n<\/p>\n
![\"A](\"https:\/\/www.nasa.gov\/wp-content\/uploads\/2024\/10\/near-surface-hydrology-diagram-wide.png?w=1499\")
<\/a><\/figure>What makes OpenET different?<\/h2>\n<\/p>\n
![\"A](\"https:\/\/www.nasa.gov\/wp-content\/uploads\/2024\/10\/openet-interface.png?w=1430\")
<\/a><\/figure>Bridging the Gap Between Farmers and Resource Managers<\/h2>\n<\/p>\n
![\"A](\"https:\/\/www.nasa.gov\/wp-content\/uploads\/2024\/10\/sacramento-san-joaquin-river-delta.jpg?w=808\")
<\/a><\/figure>